Made of 4130 Moly. Upper arms 3/4" x .065 wall tubing, lower arm 1" x .120 wall tubing. A-Arm sets include: Adjustable camber, greasable bushings, gussets at all stress points, replaceable ball joints, brake line tab on upper armand chromoly tie rods. All new ball joints designed by Mark Laeger and made in Italy. They are stronger and provide more travel.
TRX250R :std, +1, or +2
400EX :std, +1, or +2
300EX, 250X :std, or +2
LT250R 87-92 :std, or +2
Banshee :+1 or +2
$679
Swingarms
Made of 4130 Moly. All Pro-Trax swingarms include front pivot needle bearings, gussets at all stress point, double pinch bolts on round housing. Hammertone gray powder coat, 400ex in red powder coat. All arms are available in chrome. Includes rear pinch bolt seal kit.
TRX250R86. -1" (equals 88-89 length) with skid plate mount or chain guide mount
TRX250R87. -1" (equals 88-89 length) with skid plate mount or chain guide mount.
TRX250R88-89 Standard length with skid plate mount or chain guide mount.
TRX250R88-89 -1 or -3 with chain guide mount
TRX250R88-89 CR500 link with skid plate mount or chain guide mount.
300EX, 250Xstandard length with skid plate mount or chain guide mount
400EXstandard length with skid plate and chain guide mount. Red
400EX +1 1/4" with skid plate and chain guide mount. Red
LT250R 85-86standard length with skid plate mount.
LT250R 87-92standard length with skid plate mount. **Includes round housing machined from billet aluminum. Uses OEM bearings and seals (not included with swingarm). Skid plate mounts are designed to work with 85-86 style skid plate-AC racing design will not work. Chain guide mounts anr designed for banshee guide
Blasterstandard length with skid plate mount and chain guide mount.
Blaster +2 with skid plate mount and chain guide mount. Requires longer brake cable.
Banshee 87-88standard style and length with skid plate mount and chain guide mount. Uses stock carrier.
Banshee 89-03standard style and length with skid plate mount and chain guide mount. Uses stock carrier.
Banshee 87-03 Round housing , standard length with skid plate mount and chain guide mount. **Includes New billet aluminum carrier that uses stock bearings**
Banshee 87-03 -1" length. Round housing , standard length with skid plate mount and chain guide mount. **Includes new billet aluminum carrier that used stock bearings.**
Steering Stems
$571
$571
$571
$571
$571
$571
$571
$571
$543
$763
$543
$543
$543
$543
$791
$791
Warrior 86-88standard length with skid plate mount and chain guide mount.
Warrior 89-03standard length with skid plate mount and chain guide mount.
$544
$544
Solid mount for standard tie-rods for TRX250R, 250X, 300EX, 400EX
$219 Nickel plated
Anti-vibe for standard tie-rods for TRX250R, 250X, 300EX, 400EX
$274 Nickel plated
Anti-vibe with bind free swivel with heim end for Laeger Honda. Standard tie rods will not work.
$450 Nickel plated
Anti-vibe XC for standard tie-rods for TRX250R. 1" taller for extra capacity tanks
$274 Nickel plated
Clamp kits
Replacement antivibe top Includes 2 lower clamps and hardware
Pro-Taper anti- vibe clamp kit Includes Top clamp and hardware
$60
$82
Frame
Lowest Price Anywhere!!!
T-Pin front end
$2117 TRX250R
T-Pin front end consists of billet aluminum spindle uprights, 4340 spindle shafts, bind free pivotsfor the replaceable ball joints, 4130 Chromoly arms with bottom A-Arms Triple Braced for strength. Travel up to 16" depending on length of shocks used. Kit includes Spindles, A-Arms, Tie Rods, and Steering Stem.
Headstay
Fits all years of TRX250R, both stock and Laeger chassis.
No stabilizer mount , works with stock snorkle
With stabilizer mount , wil not work with snorkle
$71
$82
Swingarm Rubber Seal Kit
$21
Chromoly Tie Rods
Triple strength, rods only
$77
$77
$77
$77
$77
Complete Bushing kit
For Laeger A-Arms
$93
Ball Joints
$22 each old style
Ball Joint adjuster
Banshee upper ball joint adjuster for Laeger A-Arms
